http://www.appliancepartspros.com/pa...&pn_=134120900

This is a link to an image of the thermal limiter comparing what I see in the dryer and on line. I had a little something that came up and did not go to Lowe's. I will go to get a new limiter tomorrow. Looking at the picture are we thinking the same part?

LT

That's it. Take a wire off one end and check for continuity. Verify parts are bad before buying new. You can also take a jumper wire on it and start the unit. Make sure door is closed and timer is set to dry and push on button. It will only take 2 minutes to verify

Hello Doug,

Thanks for all the help. I called a electrician today and I had a failed breaker. It was replaced and things are back to normal... except for a mountain of laundry.:o Just want to check back in and say thanks and good luck until next time.

LT

My dryer's model # is GLEQ2152ES0... OK, When I turn the dryer on everything works but it don't get hot?? What's up with that. Had a friend come over to look at it. He checked everything he could think of. Can't find anything wrong?

My dryer comes on but don't get hot

Now he has it rigged so it heats up. But now it buzzes and turns off after about 8 to 10 munites because it is getting to hot! What part would I need to order? He seems to think it's a Humidity señor?