View Full Version : How to Remove A Broken Ceramic Toothbrush Holder
pastor1189
May 27, 2012, 08:14 AM
It is attached with ceramic tile along side. I thought about a chisel and hammer. But my wife said I would break the adjacent tile .
How would you do it?
creahands
May 30, 2012, 06:08 AM
If u have a multi tool, u can cut the holder into sections and pry out. Be sure to wear safety goggles.
Chuck
pastor1189
May 30, 2012, 06:49 AM
Yes I do have a multi tool. And a ceramic drill bit Thanks
ma0641
May 31, 2012, 03:05 PM
They make a carbide saw for a multi tool. Cut around the grout and try to pry out the old pieces. BEWARE you may pry out some of the drywall too and then have to put in a patch.
pastor1189
May 31, 2012, 03:09 PM
Thanks gang. I use the multi tool around the grout first. Then with a hammer and chisel
I tapped it off.
ma0641
May 31, 2012, 03:14 PM
There you go!