I replaced the single cartridge moen faucet after the original jammed in the valve. Now I cannot get hot water. I tried a couple of new cartridges but have the same problem. Are there any settings on the cartridge that can fix this?
Thanks.

First would like to know is this a shower/Kitchen or sink faucet?

Did you flush the faucet when the cartridge was removed?

If not try this shut the water to the faucet off, remove the cartridge turn on the water for a few seconds to flush out any debris out from the faucet, installed the cartridge and see if it is fixed.

Also did you know that Moen has a life time warranty on their parts call the customer service at 800-289-6636 and they will send you a new cartridge at no charge to you, good luck

John

Have someone stand at water heater shut off valve and pull out the cartridge yoursel and attempt to flush it out and see if anything comes out. This would isolate hot water since u don't have hot water all. U have got to do process of elimination. Let me know

That is what I just posted