Our Kenmore 80 series is not spinning. Any suggestions?

Hello,

One very common issue on these washing machines is the lid switch. On the right hand side of the lid there is a small hole. A grey piece of plastic should be their. The striker on the lid comes down and activates the lid switch sending the washer into drain and spin mode.

You can purchase a new lid switch from the link below.

Kenmore 80 series parts (http://click.linksynergy.com/fs-bin/click?id=bnjBYFjiF5s&subid=&offerid=93887.1&type=10&tmpid=2111&RD_PARM1=http&RD_PARM2=%253A%252F%252Fwww.appliancepartspros&RD_PARM3=.com%252F)


There are several good washer access and repair videos in the link below.

Appliance & Refrigerator Repair (http://www.appliancerepairlesson.com/)