mdr37129
Nov 8, 2009, 09:36 AM
My Kenmore Dryer, model 110.82836100 shuts down before finishing cycle, with an E1 Error message. This site stated E1 means thermistor is bad. OK, I have the part, I need diagram or instruction? Please, any help would be appreciated.
Mdr
WallyHelps
Nov 8, 2009, 04:28 PM
See if the three stories told here (http://www.partselect.com/PartDetail.aspx?Inventory=344958&SourceCode=7&ModelNum=110.82836100) will help you out.
If it is the "thermal fuse" instead of thermistor, then it is a pretty easy thing to replace.
Best of luck,
WallyH