How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool.

Thank you.:)

How do I adjust the water temperature on my State Select Water Heater. I don't know where my manuel is and the water is too cool.

Thank you.:)
Hi Peggy,

On the front of your heater you will find two inspection plates. Open up the bottom one and you will see a thermostat. The factory setting's 120, I keep mine at 110, that way I don't have to temper the hot water with cold. If the water suddenly became too cool I would have the elements checked. If one burned out you would have the symptoms you describe. Good luck, Tom

Hi Peggy,

On the front of your heater you will find two inspection plates. Open up the bottom one and you will see a thermostat. The factory setting's 120, I keep mine at 110, that way I don't have to temper the hot water with cold. If the water suddenly became too cool I would have the elements checked. If one burned out you would have the symptoms you describe. Good luck, Tom


Thanks so much, Tom, I will try it and let you know what happens. It is a relatively new water heater so I'm hoping the elements are OK.

Peggy

It's not lengthy.. water heater has just quit working. Only 3 years old.. what's up?

State Industries | Residential | Gas Water Heaters (http://www.statewaterheaters.com/prod/res-gas.html)