View Full Version : Loose drum in an Admiral dryer
 
 ahambrecht
Sep 25, 2008, 07:16 AM
I have an Admiral electric dryer Model number LNC7745A77.  The drum appears to be loose and it makes banging noises when on for a while but it later seems to stabilize and run normally.  The belt appears to be in good condition and tight but I do notice some banging when I rotate it by hand.  One thing I noticed was there is an brown discolored ring at the front of the drum that suggests that there may have been a belt there (The current belt is at the rear of the drum)  The paint is intact.  Could there have been a second belt in the front.  This is a 22 lb capacity dryer.
 
Any help would be appreciated.  Thanks.
 KISS
Sep 25, 2008, 07:50 AM
Check here for a diagram. Parts & Accessories | Shop & Find Lawn & Garden, Appliance Parts at Sears Parts Direct | SearsPartsDirect.com from Sears (http://www.searspartsdirect.com)
 
You might be looking at a bad bearing.
 geralddavidcase
Nov 18, 2008, 07:58 PM
Your nachine is very worn!The drum rides on that now brown edge.We replaced the missing nylon wear strip on top of the door frame.About one-third of the topsection of the front panel doorframe!
 Flying Blue Eagle
Nov 21, 2008, 08:58 PM
Ahambrecht - HERE is a list of proable causes to the noisy ;; #1 - Forign objects in drum holes :: #2 - Worn drum belt ;; #3 Faulty drum support slides :: #4noisy idler pully :: #5 - noisy support rollers :: # 6 - Loose blower :: # 7 - blower duct obstructed, Check all these items , it will be one or more of the cause of your problem :: Good luck and  GOD BLESS , Let us know which one you find is the culpret ;; F.B.E.