How do I change the blade engage cable on a 42 inch troy built riding lawn mower #6605 model.. Thank you. Beverly a:)

Blade cable, do you mean the belt?

Quote:

---

Originally Posted by ballengerb1

Blade cable, do you mean the belt??

---

It is a cable to the PTO lever used in order to make the blades turn. I had a broken cable a month ago and had a new cable installed. Now the cable has broke again. I think I can replace the cable myself. I looked underneath and found the broken cable and I think I see how it is installed to the PTO lever.

If you have any suggestions I would appreciate it. Mower is a 42 inch Troy Built Super Bronco.

Thank you again.

Beverly A

Hi,
Cable should be a 746-04092 and it has hairpin cotters at both ends. If it failed that quickly, something else is wrong or not quite right.
Peace,
Clarke

Quote:

---

Originally Posted by crigby

Hi,
Cable should be a 746-04092 and it has hairpin cotters at both ends. If it failed that quickly, something else is wrong or not quite right.
Peace,
Clarke

---

Thanks for the information. I also found that same part number in my manuel. I think I should be able to replace it. I did hit a log with the mower about two weeks ago, maybe that cause the cable to weaken. Thanks again. Beverly A:)