Powerwasher runs, good stream of water but will not build up high pressure. What to do?
Powerwasher runs, good stream of water but will not build up high pressure. What to do?
There will always be a stream of water unless there is a blockage, just from the water going in. Does the pump have a place to check the oil, see if it is good, ( not white) white shows a seal leak. Also is there water coming out of any other area, they have a pressure relief valve that if goes will not allow pressure till replaced. Also the unloader can be bad.
All times are GMT -7. The time now is 03:34 AM. |