I have replaced conrod but have stuffed up settings. Do not know correct position of piston related to tapped setting
![]() |
I have replaced conrod but have stuffed up settings. Do not know correct position of piston related to tapped setting
Are you referring to timing marks on the crank and cam? If so you will see small mark on cam that will line up with mark on the crankshaft gear .
Thank you
Don
Ditto. The rest is simple... just put in the valves and springs... its easier if the piston is at top dead center to do this...
All times are GMT -7. The time now is 03:53 AM. |