Can anyone tell me if these connectors meet code? How effective are they? Could I replace old copper lines using these connectors?
Can anyone tell me if these connectors meet code? How effective are they? Could I replace old copper lines using these connectors?
I can not tell you about code, but I have used them dozens of times and love them. For someone with little experience using other methods ( the home do it yourself person) they seem very good.
I think you are talking about "SharkBite" fittings. If so, than they are approved in So. California for use for hot and cold water installations
Welcome To Cash Acme
Agree with John...
They are great invention. Hopefully, they will replace soldering in the near future...
Yep, great fitting, and allowed by most if not all codes. I believe shark bite started this awesome trend, gator bite is the same thing with a different name. We shall see how well they hold up over the next ten to twenty years, but as of now they are trouble free(mostly). And when they do replace soldering, us guys that know how to solder will make a killing when soldering is required.LOL.
I love them I am not so good with soldering, just kidding.
Gator bites can be used with Pex line, hard copper tubing and CPVC line. They cannot be used with schedule 40 white PVC because the diameter is based on the inside diameter of the material and not the outside diameter(which is how PVC is measured. The others are measured O.D. in order to correspond with gator bite I.D. compatibility. The 3 aforementioned types can be used in any combination on any one Shark Bite or Gator Bite fitting ; i.e. a 1/2 x 3/4 T-shaped bite could be used with all 3 different water carrying line variations; PEX on one end, copper in another and CPVC in another. However, if the supply line is a hot water line, only CPVC can be safely used. All parts are available at your local or area Home Improvement and plumbing contractor/supply stores.
cnbeatty, what makes you say only cpvc can be use on a hot water line safely? I actually would say either pex, or copper would be better than cpvc, although all three are rated for domestic hot water applications. Copper would have the highest temp rating, but pex is the easiest to work with and has a max temp rating of 180 degrees, witch is more than enough for domestic hot water. I definitely agree about the rest of your post on push-fit fittings, they won't fit pvc. There are actually a number of push-fit fitting manufactures now, and most all of them are allowed by code even in enclosed areas.
Hello Cnbeatty,
Welcome to this website, You responded to a 3 years old post, please check the date on left upper corner before you respond to any thread, Thanks.
John
Thanks John.
You are welcome lee.
The little white insert that go in the tubing was not place in there. The plumber just did not insert them. WIll this be a problem. It has been a week and the connect is holding good. I was just wondering of any problems later. The Gator bites were place on PEX and Copper
No need for the plastic inserts on copper. It is recommended for pex, however I have used many of the push fit fittings on pex without the insert with zero problems to date. Only place I see a real need for the inserts is on pex pipe that may be out of round (ovaled) or on old quest plastic (that stuff is really thin-walled).
PS.
I would suggest using the inserts on pex. Just because I have done it without with no problems doesn't mean I endorse it. As long as the plumber is willing to stand behind his work, I would think you are okay as is.
All times are GMT -7. The time now is 10:22 AM. |