Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Now What--PVC cement on ABS (https://www.askmehelpdesk.com/showthread.php?t=9835)

  • May 23, 2005, 10:50 AM
    CheVet
    Now What--PVC cement on ABS
    Used PVC cement on black (ABS?) pipe on a trailer while gluing in a Drain Master flange. Cement is P-8 Nutone PVC Cement (ASTM D-2564). Joint looked good put didn't stress it. Will it hold? If not, what now? (just another example of gaining 'experience' by doing stupid things--great fun getting 'smarter')

    Thanks
  • May 23, 2005, 02:57 PM
    speedball1
    Quote:
    Originally Posted by CheVet
    Used PVC cement on black (ABS?) pipe on a trailer while gluing in a Drain Master flange. Cement is P-8 Nutone PVC Cement (ASTM D-2564). Joint looked good put didn't stress it. Will it hold? If not, what now? (just another example of gaining 'experience' by doing stupid things--great fun getting 'smarter')

    thanks
    Try to pull the joint apart. If it's tight you'll probably be OK. Next time use Oaty All purpose PVC and ABS cement. http://store.watergardenweb.com/pvcabscement.html
    Good luck, Tom

    • All times are GMT -7. The time now is 07:23 AM.