Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Removing black adhesive from floor before installing new vinyl tile
[ 6 Answers ]
I have a bathroom (at the church I belong to) that has a hard type of vinyl tile in it. A toilet has overflowed 2 times in the past and flooded the floor. As a result, a lot of the tile has come loose. I have the replacement VINYL tile, but need to know how to continue. Under the tile is black...
How to remove the black tile glue from a conrete floor in the basement.
[ 4 Answers ]
How to remove the black glue from a concrete floor in the basement. We removed the tile, which was buckling and now we are left with a black, uneven mess. We would like to just paint the floor. Please help.
Henry floor leveler compound nail through
[ 3 Answers ]
I am leveling up a wood subfloor to install a 1/2 inch engineered hardwood floor. I planned on using Henry leveling Compound up to 1/2 inch thick over an area about 3 feet wide by 8 feet long. This area is a transition are between a great room and a kitchen that will all be covered with the new...
Can I use floor leveler over Durock?
[ 3 Answers ]
I have installed Durock in my kitchen floor, and after I glued and screwed it all down, I noticed that the floor is all on one plane, perfectly flat, except for an area that runs from one of the walls to a spot about three feet from the wall. This area slopes downward. So... Can I use a floor...
Floor Leveler
[ 1 Answers ]
How do I remove excessive (dry) floor leveler? View more questions Search
|