I have a weathertron by trANE AND I HOOKING UP A HONEYWELL PRO TH 3000 SERIES
I NEED TO KNOW THE conversion of the WIRES between the two thermostat . PLEASE HELP ask if you need more imfor
I have a weathertron by trANE AND I HOOKING UP A HONEYWELL PRO TH 3000 SERIES
I NEED TO KNOW THE conversion of the WIRES between the two thermostat . PLEASE HELP ask if you need more imfor
I hope you marked and wrote down exactly where the wires came off on the old thermostat. If so list the combination.
yes the wires are still on the old one
o=orange g = green y = yellow x2= black b = blue t= brown r= red w=white
I cannot locate the exact model number you provided on the Honeywell site. This pro TH3000 does not seem to be a good number. Please recheck your number that is directly on the new thermostat. Be accurate.
Is this a heat pump system?
It is a pro 3000
Model th3110d10008-cb
That is all on the box
Yes it is a heat pump
I believe you have the wrong thermostat. You need one with two stage heat and the one you have only has one stage heat.
This is the one you need.
TH3210D1004
Here is the wiring for that unit
http://customer.honeywell.com/techli...it/69-1775.pdf
The difference is one stage heat on the TH3110D
And
Two stage heat on this one
TH3210D The numbers are close but no cigar.
You will need to buy the other one and yes I know the one you have says heat pump BUT it will not work because you also have electric heat. I can tell that by the wiring letters/colors you sent.
I have an old Whalen thermostat and I am replacing it with a Honeywell Pro 3000 The wires on the back of the Pro 3000 plate show.
W Y G O Rc R B C
Colors coming out of living Rm wall are
Yellow Orange Red Blue Black Brown
What goes where?
It's a TH3110D1008
All times are GMT -7. The time now is 02:31 AM. |