Intermittent Pilot Ignition Control Wiring Help?
I have an older Carrier gas furnace. The Intermittent Pilot Ignition Control is short cycling. I ordered a replacement one. However, with everything else now days, the newer one does not match the older one. The older one (p/n 50D49-401) has three brown wires, one red wire, one white wire, one yellow wire, and two blue wires. The new replacement Control (p/n G775 RGA-2) Has the following terminals: #1-P.V. #2-THS, #3-M.V. #4-SENSE, #5-Ground. Does anybody know which wire/wires goes on which terminal? I’ve tried to locate a wiring diagram with no luck. Any help would be appreciated. Thanks.