I have a Noma Automatic Daily Setting Block Heater timer that I have lost the instructions to. I need to program it to come on and warm up the block heater of my car tonight and cannot remember how to do it! Can anyone out there help me?
I have a Noma Automatic Daily Setting Block Heater timer that I have lost the instructions to. I need to program it to come on and warm up the block heater of my car tonight and cannot remember how to do it! Can anyone out there help me?
These are the directions for the N1506 24 hour deary duty outdoor timer
What you do How the timer responds
Plug it in Flashes the letter C
To Set current time
Press Time Button Starts at 1 am
Press until correct time
Is shown Dot at bottom indicates pm
Set on and off times
Press Mode Button Flashes P (program)
Press time button to get
To start time displays time to start in 1 hour sequences
Press mode again Flashes E (end time)
Press time until you
Get to the time to end Displays end time
Press Mode button Displays time of day you set at first
To Review Program
Press time button Display successively, for 1-2 seconds each P starting hour
And E end time
Then returns to current time
Unplugging will cancel programming and you have to start again
Manual Override
Pressing the Mode button at any time will turn ON the devices plugged into the timer. The display will indicate the letter O. The devices will remain on until the ending time you set. To return to the program press the mode button again
Hope this helps
Jim, great post, but this thrad is from over a year ago. There is also a sticky at the top of this forum on this very timer.
https://www.askmehelpdesk.com/electr...er-155408.html
Thank you, Thunderjim
All times are GMT -7. The time now is 08:09 AM. |