1991 honda accord ignition switch
My ignition failed to turn anymore which proved to be the key lock going bad tried replacing with a new one from schucks but every time we do as it states you can only turn the key from positions 1-3 and not to the off position to remove the key. According to the instructions you put the lock in place without the key until you can't push it in no more. Then you insert the key and turn it to the 1 position as you puss on the lock to get there pin to drop in place when it does that you can start the car and put it in position 1 2 or 3 but not into position 0 for shutting it off which requires pushing the key in to go to 0. are we doing something wrong is there a step missing from the instructions? Please help