Ask Experts Questions for FREE Help !
Ask
    mpeloq's Avatar
    mpeloq Posts: 3, Reputation: 1
    New Member
    		  
    #1

    May 31, 2010, 05:36 AM
    First boot problem
    Every day at first boot(cold boot) the computer need to boot twice before to reach
    The desktop,, after that it's OK,, even if I reboot many time during the day,, it`s OK,, no need to reboot twice.
    It`s a brand new disk drive,, and also I changed the CMOS battery,, thinkink that the CMOS was in cause,,
    Even these changes,still have the same problem.
    Thank`s helping
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    May 31, 2010, 05:45 AM

    When you changed the battery did you go back in and edit your cmos for your current system and "save" it? Its possible you changed the boot config and its being confused on a cold boot.
    mpeloq's Avatar
    mpeloq Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Jun 1, 2010, 04:31 AM

    To califdadof3

    Yes I reconfigured the CMOS and save.the computer still need to boot twice every day at cold boot.
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #4

    Jun 1, 2010, 02:48 PM

    Are you for some reason getting a checksum error when you cold boot? Is your setting "verbose" during boot?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dual boot problem [ 13 Answers ]

Have win.xp home-SP2.pent 4,1.6.40g HD, 512 ram.a2nd-HD, 100GIG.Idid clean install of xp then using norton ghost cloned it over to 2nd HD.Also have partition commander to give doul boot,iwould like to save c:drive as a back up.useing my d: 100 g.for every day use. The problem I have is when I down...

ThinkPad boot problem [ 2 Answers ]

WHen I try to boot my ThinkPad I get the error "UNMOUNTABLE_BOOT_VOLUME". I have not had problems in past nor have I made any recent changes. Any suggestions to get back on line. My OS is windows XP PRofessional

Longhorn 5048 x64 boot problem [ 4 Answers ]

I just finished downloading Longhorn and I burned it to dvd bootable disk using Nero 6. I rebooted from the cd drive and get Caldera DR-DOS 7.03. And a command propt at the bottom with a couple of options. When I try any of these options it says command or filename not recognized. I know that...

View more questions Search