 |
|
|
 |
New Member
|
|
Sep 9, 2009, 08:43 AM
|
|
Lost sound after reloading window xp.
Lost sound after reloading window xp. Checked sound and audio devices in contol panel and it says --no audio device with the volume section greyed out. There is no speaker icon anymore on the tak bar. Checked Add hardware in cotrol panel and genric volume is working properly it says. Can you please help!
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 09:12 AM
|
|
Right click on My Computer and choose properties
-hardware tab and then click device mgr
-look down list and look for any devices listed there that have a yellow mark present and post what info is next to the ones with yellow marks
Also, what model computer do you have
|
|
 |
New Member
|
|
Sep 9, 2009, 10:01 AM
|
|
With Yellow marks i.e. Device mangr.
-- Multimedia Audio Controller
-- Network controller
-- PCI simple communication controller
Model of computer -- Micosft Win. Xp, Home Edition, Version 2002, Service pk 3, AMD durontm processor, 850 MHZ, 384 MB RAM.
Thanks
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 11:18 AM
|
|
Really going to need the actual model # of the computer
Like, a dell w3945 or something like that,
The make and model # of the computer itself
|
|
 |
New Member
|
|
Sep 9, 2009, 12:15 PM
|
|
The only name displayed on the computer is ZIP. On system properties, I clicked computer name and it says
---- YOUR-004DBB8624. Unless u know how else I can retieve the information you need. However, I think its just kind of a basic computer for my home use only. I hope this helps. Thanks
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 01:40 PM
|
|
Any manuals that may have come with PC?
Was this a home built system?
We can try to use software to get some info
On the left hand top of page, click on CPU-Z 1.52 setup and once downloaded, install and run the program
CPUID
Once run, go to the Mainboard tab and post the manufacturer and model that is given
Hopefully we can get some info from that to go on.
|
|
 |
New Member
|
|
Sep 9, 2009, 02:00 PM
|
|
I have a feeling its home built and when I bought it from my local gazette, didn't come with any manual, howevwer, can't quite figure out were you mean by the left hand top of page . Which page please. On the window page ?Where do I go to find and click CPU-Z 1.52 please
Thanks
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 03:05 PM
|
|
CPUID
Under the CPUID logo on top left hand corner, look right below that
-you will see, download latest version
-click the first one - CPU-Z 1.52 setup
Run program to install and then run the program
Post info from the Mainboard tab as mentioned above
|
|
 |
New Member
|
|
Sep 9, 2009, 04:01 PM
|
|
CPU-Z Readme file
------------------
Version 1.52.2
August 2009
Contact : [email protected]
Web page: http://www.cpuid.com/cpuz.php
Validation page : http://valid.canardpc.com
Hall of Fame : http://valid.canardpc.com/records.php
Forum : http://forum.canardpc.com/forumdisplay.php?f=74
CPUID SDK : http://www.cpuid-pro.com/devkits.php
Configuration file (cpuz.ini)
------------------------------
The configuration file must be named cpuz.ini and be present at the same directory level
as cpuz.exe. It contains the following :
[CPU-Z]
TextFontName=Verdana
TextFontSize=13
TextFontColor=000060
LabelFontName=Verdana
LabelFontSize=13
PCI=1
MaxPCIBus=256
DMI=1
Sensor=1
SMBus=1
Display=1
ShowDutyCycles=0
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 04:04 PM
|
|
You need to install the program and then run it
The box that comes up after the prgram has been run will have 6 tabs along the top
-CPU, Cache, Mainboard, Memory, SPD, and About
-click on the Mainboard tab and post the info that is listed next to manufactuer and Model
|
|
 |
New Member
|
|
Sep 9, 2009, 04:47 PM
|
|
manufactuerer--Gigabyte technology co. Ltd
mode - 7DCEH 1x
chipset - VIA KT133A Rev 03
southbridge VIA VT82C686
Bios
Brand American Megatrends inc
Version - 62710
Date - 10/08/2001
Graphic interface
Version AGP version 20
Transfere rate 4x Max supported 4x
Sideband not supported
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 04:59 PM
|
|
OK, I am pretty sure that you will need AC97 drivers for the audio driver
Go to link below and click the Click here to Download* (in blue) about half way down page
-After you click the link it will take about 10 secs or so for the download box to come up - Save to your hard drive
Once downloaded:
-right click on My Computer and choose properties
-hardware tab and then click device mgr
-Now in device mgr, right click on Multimedia Audio Controller that has yellow mark next to it and choose Uninstall and say OK
Once uninstalled, close device mgr window
-Now go to where you saved the downloaded file below and run the program and follow instructions
-Restart computer
Now check your sound
VIA AC97 audio driver 6.80b download
|
|
 |
New Member
|
|
Sep 9, 2009, 05:14 PM
|
|
Thanks ever so much . I will do that now. I really do appreciate your time. Ill do it now
|
|
 |
New Member
|
|
Sep 9, 2009, 05:54 PM
|
|
It's working perfectly now. THANK YOU SO MUCH. I am lost for words. THANK YOU. I am very grateful. Bye for now and good night.
|
|
 |
Ultra Member
|
|
Sep 9, 2009, 06:01 PM
|
|
Glad it worked out.
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
RCA TV Lost Sound
[ 5 Answers ]
A 5-year old RCA 32 inch "traditional" television set has lost sound. All else works just fine. However, when the set is first turned on, sound is heard for about 30 seconds or less, then stops. Letting the unit sit unplugged for (up to) several hours for a "hard reset" does not help. Connecting...
Sound Lost
[ 1 Answers ]
I lost my sound and can not get it back... I did a restore... can u help me get it for free I am on fixed income.
Thank you
Candace Burns
Lost of Sound on HGTV
[ 1 Answers ]
My 42" HGTV has lost sound. The picture is fine? I haven't changed any settings or anything. Any thoughts on what could be happening.
Lost my sound op window vista
[ 4 Answers ]
I got a new computer with windows vista, it was working fine than I got a notice from Microsoft update to download sp1, since then I have no sound coming from my speakers everything else is working I'm a newbee thanks for any help
I lost my sound
[ 1 Answers ]
hello I just reformatted my hard drive with windows xp service pack 2 and now I got no sound and I got an ! Mark next to a driver called Vinyl AC'97 codec combo driver it says it cannot start help T_T here's my com info
Operating System System Model
Windows XP Home Edition Service Pack 2...
View more questions
Search
|