 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Wiring diagram for Briggs 18 hp. Ohv V twin and also single cyl. 17.5 briggs ohv en
Hi.. I am in the process of changing my single cyl. Briggs 17.5 hp. Ohv engine In my sears 1000 garden tractor 1995-1998.To a Briggs V twin 18 hp.ohv engine 1995-1998 .Everything fits nicely with a little exhaust modification.What I need is the proper way to wire the Briggs V twin engine to the original wiring used for the original briggs 17.5 single cyl. Engine. Without burning out the alt. or anything else.. I would appreciate a drawing of the proper way to wire it. Thank you for taking the time to answer my inquirey... Bob
|
||||
Check out some similar questions!
I have changed fuel filter, pump, plugs... etc... I am getting fuel to the carb, but will not start. I can pour fuel down carb and it will start, but will shut off soon after, the relay on the bottom of the fuel bowl clicks when I turn on the key, what should I try next.
I have a 17.5 ohv briggs and stratton that I am putting on a racer and need a wiring diagram so I can make it work from the factorty switch. I want to by pass all the safety wiring if possible. I just need to find a wiring diagram so I can get it wired up. I need to know if someone can help me or...
Help! I just replaced the short block on this motor and I cannot get it to run. I've adjuseted both intake and exhaust valves to 0.004 at 1/4 turn past TDC and no luck. It cranks over and kicks back on the compression stroke with smoke out the carb. So far it has not kicked over at all yet. What...
Hi, I have a Craftsman lawn tractor with a B&S 21 HP OHV Twin in it. The flywheel is very stiff to turn. So, today I decided to dive in and take a look. Here is what I found. 1. Drained oil that was over a year old... nothing but a little black/gray, but no particles in it. Refilled with...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
