Ask Experts Questions for FREE Help !
Ask
    volfan14's Avatar
    volfan14 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 3, 2009, 05:53 AM
    What causes a 15.5 Briggs & Stratton engine to not start?
    My Sears mower has a 15.5 briggs and stratton engine that is 6 years old and is having trouble starting. Sometimes when I turn the key, the motor will turn 3/4 of rev and stop due to hard compression. I can hand turn the engine past this sport sometimes and the engine will begin to turn over. Even then it takes 5 - 10 seconds for it to fire off whether I choke it or not. Then it spits out a gulp of gas and a little oil from the exhaust and runs fine for the rest of the afternoon.

    I have been told the valves are carboned over. I am looking for a fix. The mower was turned upside down two years ago on a hillside. This may be a reason for the problem. Does anyone have any solutions?

    Thanks, Darryl
    pullthoseup's Avatar
    pullthoseup Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jul 12, 2009, 09:13 AM
    I had a mower that did something similar, it turned out to be a bent shaft. Have you hit any solid objects?
    volfan14's Avatar
    volfan14 Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Jul 13, 2009, 05:07 AM
    No, not lately. However my brother had similar problems that indicated a carborator selinoid switch. My cylinder was filling up with gas, which apparently was building up excess pressure while trying to start it. When it did start, it would spit a bunch of gas and a little oil through the exhaust. I took the carborator selinoid off and had it checked and it was good. The salesman told me to take my carborator off and clean it out good especially around th needle valve. I did this and the motor has started on the first try every time since. I do not see any excess gas in the carborator after the motor is turned off and it turns over easy now. I guess I had junk in the gas that caused the needle to stick open. Thanks for the help and maybe this can help someone else with a similar problem
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Jul 18, 2009, 10:32 AM

    Hi,
    The valves need to be adjusted. There is an answer to that on the Power Tools page that involves an instructional video on YouTube. YouTube - Lawn Mower Repair Valve Adjustment
    Peace,
    Clarke
    thadd's Avatar
    thadd Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Feb 7, 2010, 12:38 PM

    Thank you crigby, I have had the same problem for years. Went through a battery every year. Fixed it in 15 minutes with your help.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20 hp Briggs and Stratton engine won't start -TroyBilt mower [ 4 Answers ]

I have a Troy Bilt riding mower and it won't start. The battery has been checked. I think it's the starter. Anyone know how to change the starter?

Briggs & Stratton engine on a lawn tractor will not start [ 8 Answers ]

I recently got a used Craftsman lawn tractor with 15.5 HP turbo OHV Briggs & Stratton engine. It does not start - it cranks, engine turns (when I take out the spark plug, I can feel puffs of air coming out), but the engine does not catch on. I have put in a new battery, cleaned air filter, put in...

Briggs & Stratton Vanguard Engine Won't Start [ 5 Answers ]

I have an 1998 Ingersoll 4016 with a 16 HP Vanguard engine. When I try to start it, it sounds and feels like the starter is spinning but not engaging the flywheel. I have not had any problems starting until now. It has about 220 hours.

Lawn Tractor will not start, Briggs&Stratton 18.5hp engine [ 3 Answers ]

I have a 2 and 1/2 year old Craftsman Lawn Tractor with 18.5 Briggs & Stratton Engine (31P777-0348-E1). I has been serviced each year prior to use. Have been using all season with no visible problems. After starting the engine and ridng for about 2 minutes, the engine stopped. There is no noise...

View more questions Search