We are in the process of changing our small steam heated library to hot water heating on an extremely limited budget. Three of the existing zones are not presently being used but our heating engineer suggests changing out the existing pneumatic actuated steam valves to pneumatic actuated hot water...

We need to take off our 20 yr plus push connect valve (grey plastic toilet valve) and put a new metal one in to repair the leak in our toilet connecter ( grey tubing also) Chances are the wall stem is made of grey tubing or copper. We bought a new metal push connect valve and toilet connecter. ...

I have a constant drip in my bathroom sink. After a little trouble shooting, I came to the conclusion that my hot water valve underneath the sink is the culprit. I traced the pipe down the wall, into the basement and to the water heater. The only thing between the water heater and the old valve in...

Help and suggestions!! The middle handle, used to divert water from the tub spout to shower head is stuck in the 'tub' position. I have removed the handle and trim bezel and tried to turn the shaft with pliers - no luck & quit before marring the splines on the brass shaft. What now??

My plumber told me my water pressure is too high and is ruining my fixtures. Apparently my house is old and does not have these. Is installing these valves something I can do myself? The plumber wants to charge me $500.00. If so, where can I get directions? Help.