Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tiolet tank adjustment
[ 1 Answers ]
Hi, I have a slow leak from the tiolet water basin into the bowl. I know that the water level line on the basin inlet is being exceeded to the point where the water in overflowing into the inlet tube. I don't know how to manipulate the float so that the basin doesn't fill up so high. It's a kohler...
Valve adjustment
[ 1 Answers ]
16.5 overhead valve I/c briggs motor on riding mower what is the proper valve adj.
Color adjustment phiilips big screen
[ 1 Answers ]
Hi, I have an hdtv phillips monitor 60 inches. A so called tech had replaced or fixed the board , we didin't had picture at all, now we do after the installacion but the color are all messed up I've play a little bit with the conversion of red blues etc by putting togheter the 2 crosses But I...
Shower diverter adjustment
[ 1 Answers ]
Let me start by saying I an a renter suffering from half-assed maintenance. They recently installed a shower diverter, but it requires an awful lot of water pressure in order to stay "open". As a result we are running out of hot water without being able to get through 2 short showers in the...
Gas valve noise on main valve engagement
[ 1 Answers ]
I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is... View more questions Search
|