 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Unable to push disabled mower
I have a Honda 3013 Hydrostatic mower. It suddenly stopped in the middle of my yard. I am unable to start it. My biggest problem is I am unable to move this large mower unless it is under power. Is there a way I can place it out of gear so I can move it back to my garage? Thanks
|
||||
|
||||
|
Read about the transmission release lever on page 16 of the mower's Owner's Manual.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How much oil am I supposed to put in my push mower? Yes I know about checking the dipstick but I need to know the exact amount to put in there in the first place. It's the cheapest push mower Wal-Mart sells and it's the WeedEater brand made by Briggs and Stratton if I am correct. Thanks! ...
My push mower motor started to run uneven and sputter. I shut it down... let it cool down... but then I discovered that gas was getting into the oil. Did the motor blow a gasket ( which one ? ) or could it be another problem ? Thanks,Bowdon
Hi, I removed the toilet and floor of one of my 1952 house's bathroom. I retiled it but now the flange is 1/4' too high. The tube is metal concrete slab poured over it. It was higher before I put a wood panel over the flange and hammered it down. I thought it would slide inside the metal tube but...
I have a briggs and stratton 22 inch cut 3.5 hp self propelled push mower my question is where do you put the oil in at ?
I tried to start my mower today and after a couple of pulls on the rope it locked up. I can not pull the rope nor can I turn the blade. Can someone help? Thanks
View more questions Search
|
