Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Troubleshooting AC unit
[ 1 Answers ]
Are there any things I can check before calling a pro to look at my ac unit. I just noticed that my ac won't turn on. The fan works and the thermostat is reading the correct temp. I turned off the fan and turned the temp down to try and kick the unit on. Nothing happened. Could this be a...
Condenser troubleshooting
[ 3 Answers ]
I have an ducane condenser unit. And every time I turn my ac on the unit will run well for about 20 minutes to 30 minutes and then the unit fan stops but the compresser still run and humms. So I shut the unit down for 1/2 hour or so and start the unit back up and it does the same thing run for...
Mtd snowblowers
[ 2 Answers ]
I have a older model mtd 10/28 and need to replace two auger belts never did before,please need info with illustrations if possible:confused:
Troubleshooting.
[ 2 Answers ]
I'm trying to trouble shoot an older computer I inherited. I am completely new to PCs. At any rate it has two problems that are possibly relateed. 1. The image the monitor (I have tried 2 different working monitors) has a bunch of red (sometimes grey) vertical lines across the screen which...
Second HD troubleshooting
[ 1 Answers ]
Ok, here's the skinny... Intstalled my girlfriend's HD (Maxtor DiamondMax Plus 9 80GB ATA/133 HDD) onto my computer as a 2nd HD(slave). All jumpers are set correctly, all cables are correct (not the 1st time I've done this). Everything works fine, it's detected and I do have access to it. ... View more questions Search
|