Ask Experts Questions for FREE Help !
Ask
    tas121762's Avatar
    tas121762 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2010, 08:39 AM
    Toro 57360 blade removal
    How do you remove the cutting blade from Toro 57360, I recently got this unit and the blade is dull and I wanted to sharpen? It seems as if there is a nut somewhere?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 31, 2010, 04:42 PM

    Hi,
    There should be a bolt in the center of a skid plate at the center of the blade.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removal of Toro blade clutch [ 1 Answers ]

How do I remove the bolt (on the end of the crankshaft) that holds the electric blade clutch on a Toro commercial walk-behind Model 30159. When I try to turn it, the engine crankshaft turns with it.

Toro 57360 drive belt [ 1 Answers ]

Can not find the proper drive belt for the Toro Model 57360; serial number 6000327. Does someone know where to order this part? The last two belts I ordered did not fit. Thanks

Toro 57360 Clutch locked in engaged mode [ 2 Answers ]

Cannot shift when engine running, and mower keeps trying to move forward. Installed new belt. Ran following test: Park Brake ON Wheels chocked Tranny in neutral Clutch Depressed or Not depressed (makes no difference) Transaxle pulley still turns.

Replacing traction belt on toro 57360 with manual [ 1 Answers ]

1980 11hp 32" cut riding mower. Found a surprise when attempting to follow instructions. Removed blade clutch mount bolt and the cutter blade assembly is supposed to drop off the engine crank to enable belt removal. No! There is a thing called the Clutch actuator, which is used by the...

View more questions Search