I have a craftsman 536.886120 snowblower that will briefly start up than stall repeatedly.
I will use primer and will start again for a few seconds then die out like it is not getting gas to carb
Add your answer here.
Check out some similar questions!
Snowblower [ 3 Answers ]
826 toro snowblower drive was working now stopped??
Snowblower quits [ 1 Answers ]
Have TECUMSEH 5.0 hp, DYNAMARK. After a few seconds of running it keeps quitting, no matter how many times I prime, behavior is the same, I cleaned the spark plug and checked the oil and filled a 1/4 tank of gas but behavior is same , quits after a few seconds. Please note that I have choke and...
How can I fix my snowblower [ 1 Answers ]
I put the wrong mix on the snowblower I have a 2 cycle craftsman gas. I put more oil then gas tried dumping someof the gas out so I can put more in. at first the engine was turning now it won't even start. How can I fix this problem
Manuel for snowblower [ 1 Answers ]
I need the manuel for a murray ultra 5hp/22" 6 speed snowblower.Won't start.
Old snowblower [ 1 Answers ]
I have an old Toro 826 used snowblower that was given to me. I cannot start it. I bought a new spark plug, filled the gas tank, even put a little bit of gas where the spark plug goes. I still can not start it. Can someone please help me?
View more questions Search