Ask Experts Questions for FREE Help !
Ask
    ab4343's Avatar
    ab4343 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2014, 12:21 AM
    Sears rider skip while mowing grass
    My sears riding mower skips grass when mowing. It has about a 2 1/2 swatch of missed grass off center to the right of the carriage. The blades are sharp.
    ab4343's Avatar
    ab4343 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jul 5, 2014, 12:24 AM
    Sears rider mower skips while mowing. It has about a 2 1/2 inch swatch that is off center to the right of the carriage. My mower blades are sharp.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #3

    Jul 5, 2014, 04:48 PM
    Hi,
    Ar they both on right side up?
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a Sears LTX 1000 mower - mowing uneven & losing pins that holds the deck on! [ 0 Answers ]

I have a Sears LTX 1000 mower. It is mowing uneven and it keeps breaking off the pins that holds the mower deck onto the tractor. I was told that the bearing needs to be replaced. My husband who is mechanical inclined said they are working properly. He claimed it was the spring that engages the...

Mower blades slow down on sears rider [ 4 Answers ]

I have a Sears 42" cut that I have used extensively for 8 years. This year the mower blades slow down when under even a small load. Is this the belt slipping or something else? I have never changed the belt as I have never had a problem before.

Sears craftsman rider mower troubleshooting [ 2 Answers ]

I own a Sears Craftsman riding mower with a 42" deck. It's 17 horsepower. Every time I engage the blades, the engine cuts off. I can't seem to get the cover that is over the pulley on the left off. I've cleared dried grass from under the deck, and have applied WD 40 to the pulley wheels. The blades...

Mower will nopt disengage on a Sears 16hp rider with 42 [ 1 Answers ]

I have aSears rider with 42" cut and the mower will not disengage. It is a mower with a lever that you push up and lock in place to engage the mower. There is a cable on the lever with a spring on the end of it that is hooked to the mower deck. When I pull on it, the mower disengages. Is it...

Sears rider blades won't turn [ 1 Answers ]

I replace the engine on a used Sears 42", 6 speed riding mower. My problem is that when I engage the blades the engine stalls. The belt, 1/2" wide seems to be in a bind in the engine pulley groove. It will turn the blades if I manually turn the engine in the reverse direction, but not going in...

View more questions Search