Ask Experts Questions for FREE Help !
Ask
    baxter04's Avatar
    baxter04 Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Feb 21, 2014, 08:31 AM
    Generator voltage and hertz
    I have a gas portable generator that was only putting out 114v. Replaced the regulator with adjustable type! Output now is at 125v/250v at 61 hertz. Is this acceptable.
    baxter04's Avatar
    baxter04 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Feb 21, 2014, 08:34 AM
    Is 125v/250v at 61 hertz acceptable for a gas generator?
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #3

    Feb 21, 2014, 03:33 PM
    If it has a 240 VAC output receptacle. 61 HZ is fine
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Using a 250v/50 hertz light set in a 120v/60 hertz socket [ 1 Answers ]

I received a xmas gift from Germany that has 10 mini bulbs. The plug is marked 250v/50 hertz. Can this be used in a 120v/60 hertz outlet using an adapter?

Generator voltage too high [ 3 Answers ]

I have tried everything to lower this voltage . Rpm and cycles are good , I've changed the voltage regulator, checked windings and exciter field. I was thinking about putting a resistor inline to reduce this high voltage problem. T he generator is a generac 7000 EXL 12250 surge. Please help. [...

Generator Fluctuating Voltage [ 3 Answers ]

Part 1 I have a 5kw 120/240v generator that powers my boat. A phase goes to the battery charging side of the inverter charger and B phase goes to the House Power side of the inverter charger. When the generator is running, I get a large voltage fluctuation from 108v to 127v and this causes the...

Generator voltage 440 [ 1 Answers ]

I have a Coleman Powermate 5000. Ran well last year in snow power outage. Pluged it in this year and lost several TV and computers. Checked all the plugs and wireing, and at last found the generator was putting out 220 on each leg of the 220, and putting out 220 on the 110 side. What's wrong?

Generator Voltage [ 2 Answers ]

HELP: I have a new Coleman 1350 generator that has 2 - 120 volt receptacles on it. The problem is that the 120 volt receptacles are putting out 240 volts. I've looked for some way to get the right wiring combination, but I don't see any way to correct. The company who made the generator is no...

View more questions Search