Ask Experts Questions for FREE Help !
Ask
    jacnbriwinn's Avatar
    jacnbriwinn Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 18, 2013, 09:41 PM
    Honda 1011 ride on mower engine problems
    Hi , My mower starts, runs for 10 minutes, engine starts pulsing, backfires then stops. Have changed spark plug, air filter, fuel filter, running out of ideas.
    Brian
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Mar 19, 2013, 07:42 AM
    Make sure the vent in the gas cap is not plugged. Loosen the gas cap and run the engine. If it runs OK, that's the problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to start Honda Riding Mower(Harmony 1011) [ 1 Answers ]

I have Honda Harmony 1011 riding mower. But it is difficult for me to start. When I tried starting engine, it cranked but never reach at full running mode. I wonder why...

Honda 1011 Harmony Riding Lawn Mower [ 1 Answers ]

I just inherited a Honda harmony riding lawn mower. Bought a new battery for it and it started right up. After I found the fuel shut off course. It will start up and idle all day but for some reason, once I engage anything (remove the parking “lock”, engage the blade, shift into gear from...

Honda Harmony 1011 Riding Mower [ 1 Answers ]

I need to level the deck on the mower and have no clue as to how to do it. How do I level the deck so the mower will mow an even depth.

Ride on mower engine problem [ 3 Answers ]

Hi, I have a ride on Snapper mower powered by a 14HP Briggs & Stratton engine. Model 287707, Type 023501 Code 9601084A I can start the engine with the choke engaged and it will run. But when I take it off choke the engine stalls. Do you have any idea what the possible causes could be....

View more questions Search