 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I replace a steering shaft on a Model # 13AN77KG011 ?
Model # 13AN77KG011
My 'Bearing, Flange, Hex 5/8' Part # 741-04124 appears to be a big Phillips head screw. Breaks left I assume. Tight. Going to have fun with that but I guess a large phillips driver on a ratchet wrench? Also, please tell me a wheel-puller is not required to get the steering wheel off a riding lawnmower. I have already removed the bolt and washer from it. My goal is to replace the shaft. Part #738-0919A |
||||
Check out some similar questions!
Replace cruise contol switch on honda 2006 accord (on steering wheel right side)
[ 0 Answers ]
What are the steps to replace the switch.
Bryant model 373lav how to replace the blower fan
[ 0 Answers ]
Steering model 917.270532
[ 0 Answers ]
What is the steering conections
How can I line up the auger and shaft horizontally to replace the shear pin?
[ 5 Answers ]
I snapped the shear pin on the left auger of my snowblower. I have no trouble lining the auger and the shaft. My problem is that when they are aligned rotationally, the holes are off slightly horizontally. Enough that I cannot get the remainder of the pin out. There is no play in the auger at all....
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
