Check out some similar questions!
Generator wiring:  new generator gfci breaker tripping
 [ 2 Answers ]
 Generator wiring: I have a new honda generator. I ran 3 wires from the garage to the transfer switch in the house. When I start up and throw in the breaker on the generator, its GFCI trips immediately. It is a long run (125ft) run to the house and I used heavy wires. But I only ran 3 (blk,... 
Connecting Generator to Generator Transformer.
 [ 0 Answers ]
 For connecting 7 MW generator to generator transformer, which is better cable or NSPB ? 
I require for a Power Plus 5000 Generator 1 generator under following specifications:
 [ 1 Answers ]
 I require for a Power Plus 5000 Generator 1 generator under following specifications: 5000 Watts, 120V, 1 Phase, 60 Hz at 3600 RPM, 3720 RPM at no-load. Thank you, Publio 
New internet cable = not enough MTU for xbox live?
 [ 3 Answers ]
 Hi I got a brand new 40m internet cable to use with my xbox360 and computer upstairs (the modem is downstairs). When I try to connect to xbox live, an error message appears saying "your network doesn't have a sufficient MTU setting" - xbox live has a minimum MTU setting of 1364. I have checked on... 
Mtu settings
 [ 3 Answers ]
 
  
  Does anybody know how change the mtu settigns to 1364. Have no router sraight shot to the xbox using a comcast modem motorola View more questions Search 
 Add your answer here.
  |