Ask Experts Questions for FREE Help !
Ask
    bfowler71's Avatar
    bfowler71 Posts: 4, Reputation: 1
    New Member
     
    #1

    Aug 17, 2011, 05:29 PM
    Brigg & Statton 17hp engine will not turn over when hot
    Problem: Starter will not turn engine over when it is hot and sits about 30 minutes.

    Lawn Machine 42" model 13bk608go62,
    17hp Briggs & Stratton twin cyl engine #42a707-2238 made by MTD.

    Starts and runs great on cold start. After using it about 45 minutes and I turn the engine off and let it sit about 30 minutes, the starter will not turn the engine over until it cools off for about 2 hours. The starter will try but just can't turn it over. It is the same sound you get when you have a weak battery. The battery is fully charged. All cables are clean and in very good condition. The engine does not appear to be too hot. I have replaced the solenoid and installed in-line fuel cut off valve. I have cut off the fuel valve and let the gas run out of fuel and it still will not turnover over when hot. The mower is always kept inside and clean. I only cut about ¾ acre. The mower is a well maintained and never been overused.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #2

    Aug 17, 2011, 05:31 PM
    Time for a new starter...
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #3

    Aug 17, 2011, 09:02 PM
    You need to set your valve clearance.
    bfowler71's Avatar
    bfowler71 Posts: 4, Reputation: 1
    New Member
     
    #4

    Sep 14, 2011, 12:23 PM
    Installed new starter with housing about a 1/4" larger and fix the problem. Now turn over like a horse rolling over in the dirt.
    smoothy's Avatar
    smoothy Posts: 25,490, Reputation: 2853
    Uber Member
     
    #5

    Sep 14, 2011, 12:53 PM
    Thanks for the Follow-up. I actually experienced that first hand with an engine in that same family on my own Tractor 2 years ago, and several cars over the years.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I can't get my 17hp craftsman (mo.917.270711)to turn [ 0 Answers ]

17hr.b&s.sears rider.mo.917.270711.I have to of the same mo.mowers.one is a doner mower and both ran fine electrecly and worked fine but was burning oil on one,so I swoped engines then all my problems started.First,stater burnt,no fire with the grond on coil,had to jump the selonoid from batt.to...

Briggs & Strat 17HP engine that is smoking [ 1 Answers ]

I think it is a blown head gasket - could this be correct?

Adjust valves on 14.5 Briggs and Statton Engine [ 1 Answers ]

I need to know how to adjust the valves on a 14.5 hp OHV I/C quiet engine.

12.5 horsepower brigg and strattion engine on a murray. [ 2 Answers ]

I just recently put a 12.5 horsepower B&S engine on my murray mower. The original Brigg. 12.5 motor slung a rod. So I put this one on there. It's a little older engine.it has 1wires (one red one) coming out from under the flywheel. And the other one has 2 wires one red and one white. What are...


View more questions Search