Ask Experts Questions for FREE Help !
Ask
    Prichard4045's Avatar
    Prichard4045 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2011, 07:59 AM
    L-130 john Deere charging problem
    I have a L-130 john Deere that will not charge the battery . I changed the battery and voltage regulator . Any help please
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Apr 6, 2011, 06:48 PM

    Make sure you have battery voltage on the battery wire going to the regulator
    With engine running the two white wires on the regulator should have around 25-28 ac volts
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere LT160 not charging [ 1 Answers ]

Re John Deere LT 160 with Kohler engine. Is there an alternator ? Where is it? My lawn tractor does not charge the battery.

Mower Deck Belt Replacement on a John Deere 130 [ 4 Answers ]

Hi, I have no manual and no original belt.. I have the new part.. Seeking some help replacing this belt. If anyone has a diagram that would be great.. I can't seem to get the new belt to fit around the pulleys. What am I missing? Any help would be greatly appreciated! =^] Thanks, Sue

How to replace the deck belt on a john deere 130 [ 1 Answers ]

Please help me to replace the deck belt on a john deere 130. Thank you!

Charging john deere battery [ 1 Answers ]

I live in northeast and made error and I did not remove battery from tractor (x3oo john deere) when I stopped using it in Nov.. it is kept in shed... went out 2 weeks ago to just start it... it obviosly did not start , I believe it is a battery issure (battery is only 1 year old... I have...

John Deere 111 charging issue [ 5 Answers ]

Ok, a little info first. I bought an old JD 111 with a bad motor. I then bought an old Cenex rider with a new motor for the engine. The 111 was originally an 11 hp Briggs and the Cenex had a 12 hp Briggs. The swap was far more involved than first believed, but it is done. My question is this....

View more questions Search