Ask Experts Questions for FREE Help !
Ask
    auslandm's Avatar
    auslandm Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 18, 2011, 09:47 AM
    Model number for craftman snowblower?
    I have purchased a used craftman snowblower, but the model plate is missing. I'm guessing it was originally purchased in either '98 or '99. It is a 8.5hp 28" cut. It has 6 speeds forward and 2 reverse. It has the chute directional crank and a lever for adjusting the chute height up on the console. It also has a headlight. Is there a sight I might be able to match by looking at pictures to get a model #.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jan 18, 2011, 10:01 AM

    So there is no model # plate on your machine? http://www.searspartsdirect.com/part...quipment-Parts
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

BOBCAT Model 820 Snowblower Belt Part Number [ 4 Answers ]

I have a 1964 Bobcat snow blower made by Wisconsin Marine. I need to find a replacement belt for their #98 in the parts sheet. The belt is a V-Belt about 53.5 inches by 1/2. But it is very narrow on the tappered end.

Part number for manual to noma snowblower model e245 murray [ 3 Answers ]

I am looking for the manuals to a Noma Snowblower model E245. Does anyone have this manual or know where I can get it.

Need to identify model number for snowblower [ 1 Answers ]

I purchased a new Craftsman Briggs and Stratton from an outlet other than Sears(305cc, 13.5/27 OHV, 6spds frwd and 2 rev. but there was no model # sticker on the snowblower. The manufacturing date is 09/08.Does anyone know how I could go about finding a model # for the blower? I have the serial #...

Craftman snowblower [ 2 Answers ]

I have a 8.5 hp craftman snowblower,could anyone teel me ,how to replace a auger clutch cable,the cable inside the housing? Thanks

Craftman snowblower [ 6 Answers ]

I have a used snowblower and it works, some what fine. I have noticed it starting to cut out when I start blowing the snow. Now I have changed the belts on the snow blower and that's not the case. Can anyone give me some suggestions on to rectify this problem. It is 10 hp and the cut is?? 27 or...

View more questions Search