Ask Experts Questions for FREE Help !
Ask
    sorrell5's Avatar
    sorrell5 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 28, 2010, 12:38 PM
    Wiring diagram for scotts1642 ignition switch
    Pulled out the old 3 position switch(lost it) but can only find a 4 position switch. I need to know what color wire is for what so I can wire it spade by spade
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 31, 2010, 06:49 AM

    Hi,
    As far as I can tell , you are speaking of in compatible switches that do not fit in the same hole, use different keys and are manufactured by different companies.
    I believe you want the AM119111 made by Indak.
    The other is a GY00191 made by Delta.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Rotary switch wiring diagram [ 4 Answers ]

I purchased an old rotary switch, unfortunately without a wiring diagram. It has four settings (off, low, med, hi), and four wiring poles. Contacts rotate at two levels and connect the poles as shown in the attached JPG. My question is how to wire this thing (I assume there are three incoming...

How to wiring diagram for a DPST rocker switch [ 1 Answers ]

Guitar amp Replacement on/off switch Dpst rocker switch Which wire to which pole

Wiring diagram 2 lights 1 switch (I need) [ 1 Answers ]

But the catch is I already have 1 light working with power in and power continuing to other lights and switches. I want to add 1 more light and 1 switch to control these 2 lights. PLEASE HELP. THANKS

Ignition wiring diagram; Tractor [ 0 Answers ]

I have a Alice Chalmers Gas Model 170 tractor that the ignition switch went bad. It has 6 poles and I do not have a clue where the wire go to make it work. PLEASE HELP ! The battery is fully charged... there is a separate starter button and ignition light on the dash... and clutch has to be fully...

View more questions Search