Ask Experts Questions for FREE Help !
Ask
    kwood70458's Avatar
    kwood70458 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2010, 07:32 AM
    How to adjust valve 16.0 craftsman lawn tractor
    Need to know what to set my valves at on my 16.0 hp craftmans lawn tractor
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
    		  
    #2

    Jun 13, 2010, 01:35 PM

    Craftsman model #?

    Engine numbers? Engine Make? This info usually stamped on blower housing.

    Some valves are usually set at 1/4" after TDC, power stroke. Typically a dial indicator is used to find this point and both valves are adjusted at the same time.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman Lawn Tractor - Unable to Start Tractor [ 4 Answers ]

Hello, I currently having difficulty starting my Sears Craftsman Lawn Tractor, (Model# 917.259830). I was using the tractor and had to shut it off to move a lawn hose. When I tried to start it again it just clicked. Specifically upon turning the keying, it makes a click sound followed by a whin....

How to adjust valveson 17.5 craftsman lawn tractor [ 1 Answers ]

Help How to adjust valves on craftsman 17.5 lawn tractor

How to adjust Craftsman Lawn Mower, Mod. # 917.274391 [ 4 Answers ]

I've got the manual and followed said procedure. Here's my issue>the FRONT part of deck is level side to side. BUT the BACK RIGHT side of deck is 1/2" HIGHER than the BACK left side. There is nothing in the manual that addresses BACK side to side discrepancies. What do I do? I'll be...

Craftsman Lawn Tractor [ 3 Answers ]

How do I remove the blade carriage from the bottom of the mower?

Craftsman Lawn Tractor [ 7 Answers ]

I have a Craftsman Lawn Tractor model no. 917.272751. I have put new belts,blades,spark plug,gas filter,air filter,battery, solenoid and 3 new starters. It will not start. If I keep trying to start it burns the starter up. If I hand turn the motor backward a few times it will start right up. ...

View more questions Search