Check out some similar questions!
Briggs & Stratton 18 HP Vanguard
[ 5 Answers ]
I am trying to fix a Toro 3100 Triplex mower used on a golf course. The machine has about 2500 hours on it. It is powered by a I am trying to fix a Toro 3100 Triplex mower used on a golf course. The machine has about 2500 hours on it. It is powered by a Briggs & Stratton 18 HP Vanguard V-Twin ...
Briggs & Stratton 16hp vanguard
[ 11 Answers ]
I have a simplicity mower (1998) with a 16hp vertical shaft vanguard v-twin engine (303777 1111-51). Yesterday, after running the mower with turbo bagger attachment (a little extra load on the engine), for about 20 minutes, I idled back the engine and it began belching large clouds of blue/white...
Briggs & Stratton Vanguard Engine Won't Start
[ 5 Answers ]
I have an 1998 Ingersoll 4016 with a 16 HP Vanguard engine. When I try to start it, it sounds and feels like the starter is spinning but not engaging the flywheel. I have not had any problems starting until now. It has about 220 hours.
Briggs & Stratton 16HP Vanguard Motor
[ 4 Answers ]
Hi, I have a B & S 16Hp Vanguard motor that runs hydraulic tools. The motor was smoking and running rough so I replaced the oil, gas, and air filter. I started it up with out the oil filter on and the motor runs perfect. I reinstall the air filter and the motor begins to choke out and run...
Briggs & Stratton 16 hp Vanguard
[ 2 Answers ]
Hello all, I have a this 16 HP Vanguard motor that came on a Dosko stump grinder. My problem is that the fuel will weep into the block and fill my cylinders. It also drips out of some sort of metal intake line that has nothing attached to it. This intake does suck air as it will kill the engine if... View more questions Search
Add your answer here.
|