Blades don't engage

littleoldmeeve Posts: 2, Reputation: 1

New Member

Jun 6, 2010, 10:06 AM

Blades don't engage

I have a L2548 john deere lawn tractor. I have check sit switch and replace. My pto switch came on but quit, came on and quit, then wouldn't engage again. What could it be? I check all the electric and fuse, however, I didn't replace fuse,

Check out some similar questions!

Blades will not engage on Craftsman ZT7000 [ 2 Answers ]

I was trying to get my mower running for the first time this year. I had to replace the battery first. While connecting the positive lead on the battery I accidentally touched the negative lead with the wrench and caused a small fireworks show. I didn't think much about it until I tried to start...

Craftsman mower blades won't engage [ 1 Answers ]

Have a 42", 21 hp Craftsman Bob Villa mower and when you pull the PTO switch out it kills the engine. If you slowly pull it out the blades will engage as long as it stays in same position, you can't pull it all the way out or it will kill the engine. Have replaced the PTO switch, same results. ...

Blades will not engage [ 2 Answers ]

We have a 2003 Craftsman riding mower. The mower will start but you cannot engage the gears. Any help?

Mower Blades won't engage [ 2 Answers ]

When I pull the blade switch on my Craftsman 16.5 hp riding mower, nothing happens. I had this problem previously, and it was the PTO. Since that was a year ago, I really don't think it's that. Recently when the blades wouldn't engage, I checked/wiggled the wiring to the PTO, and the blades did...

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...

View more questions Search

Check out some similar questions!

Add your answer here.