 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
John Deere 112L dies when blade is lowered
Just bought an old 112L - If I prime the carb and jump the battery the engine will start and run. It seems I can drive it around without issue but when I engage the PTO and lower the blade it dies and drains battery. If I raise the blade before it dies it seems to pick up power and cont. running even though the PTO is still engaged. I verified the blades turn easily and bearings are not locked. Dealer told me to change the Voltage reguator which was no help. Verified battery and seat switch is good. Can't find a svc manual so I am looking for insight from anybody that might have experienced the same issues.
|
||||
Check out some similar questions!
John Deere 14SB Mower I am trying to remove the Blade clutch. I have removed the first half of it but there is what looks like a big washer holding the rest of it onto the shaft. How do I remove this? Nathan
My lawnmower will not start. If I try to start it, it will crank a couple of time, but will not start. Then when I try again right after the first time, it doesn't even crank at all. I bought a new battery for it, but it is still doing the same thing. I can jump it out with jumper cables on my...
Can someone get me a diagram for the blade belt routing
My John Deere 160 mower blades do not engage when I flip the switch. There is power to the blade clutch so the switch is good. Can the clutch be rebuilt? Also does anyone have parts diagram they can scan?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
