Ask Experts Questions for FREE Help !
Ask
    timejeep's Avatar
    timejeep Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 22, 2009, 09:42 AM
    Removing rider blade
    How to remove a troy bilt riding lawn mower blade?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Nov 22, 2009, 09:55 AM

    Hi,
    The general consensus is to use a piece of 2x4 to block the rotation and turn counter-clockwise on the either bolt or nut. If it is a bolt, it is probably 9/16" or 5/8". If it is a nut, it is probably 15/16"
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing mower blade [ 1 Answers ]

I know that a nut/bolt typically loosens counter clockwise. Is this true with a mower blade bolt on a walk behind push lawn mower? Or is it threaded backwards?

Rider dies when blade engaged. Starting fluid can keep it running though. [ 6 Answers ]

My rider is Yard Machine by MTD Model 678 (More specific - 13af678g205) The mower will start as long as I either pour a little gas into the carb or shoot some starting fluid into it. Once started I can drive it around all I want until I engage the blades. It putters and within five seconds it...

Removing riding mower blade [ 4 Answers ]

I am unable to remove my mower blade on my craftsman riding mower LT1000. I removed the top nut but I am unsure if I knock down the shaft with a hammer or take it off another way please help so I can sharpen my mower blades. Thank you mike

Removing the cutting blade [ 2 Answers ]

I have a Yard machine riding lawn mower.Can some body tell me how to take the cutting blade out for me so I can sharpen them.

View more questions Search