 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
John Deere 160 lawn tractor
I had to replace the belts in my tractor, and hence had to remove the clutch etc. to do so. Now that I have it back together, the clutch does not disengage the belts and stop the tractor correctly. I assume this is either an adjustment on the clutch, or the belt itself. Can anyone help with this?? Does that clutch have to be torqued at a specific torque? Thanks
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My lawn tractor (LT)will not start. When it is on choke it just acts like it is not getting fuel. When on run when I try to start it it backfires and will not start. I checked the fuel filter, chenaged the spark plug, made sure the carborator was not clogged cleaned out the carborator bowl. The...
I have a 3 year old John Deere L110 that is not charging the battery. Over the summer, the engine has cranked slower and slower, until it finally would not start. I could jump it with a bump box no problem. Plenty of cranking speed. I also put a trickle charger on the battery for a couple days,...
I am having problems with my just under 2 year old lawn tractor. It works fine with the mower attachment. But just before Xmas 2006 the problem started, when blowing snow with the snow blower attachment that I just purchased early spring 2006 and only used a couple of times with no problems....
I have a john deere 160 lawn tractor that won't start. Was running great. Next time zi went to use it, it wouldn't start. Pulled the plug it didn't look bad but I replaced it anyway. Still no start. Checked and no spark. Bought a new coil still nothing. Gap is good on the plug and the coil. Nothing...
Hi I was wondering how I can get a wiring diagram for a John Deere 318 lawn tractor? I have found everything on the web except the diagram.
View more questions Search
|
