Ask Experts Questions for FREE Help !
Ask
    mahyar2412's Avatar
    mahyar2412 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 13, 2007, 04:27 PM
    Spark plug
    My L-120 is not starting ,I believe need to change the spark plug.
    But I can't change it since it is too deep to use any tool .
    What shoul I do?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Jun 13, 2007, 04:57 PM
    You need to use a spark plug socket or a deep well socket
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawnmower - Briggs 7 HP - no spark to plug [ 1 Answers ]

The plug is not sparking on my Briggs 7 HP lawnmower, what is wrong, what should I check?

Autolite Spark Plug destroys Honda V6 3.0 [ 1 Answers ]

I recently installed Autolite spark plugs into a 2003 Honda accord. After installing, car began to randomly misfire. After driving car 35 miles, car blew 3 back side piston rings and catalyst converters. My $10 plugs are costing me $8700. Would the Autolite plugs be too hot or simply a...

2001 grand am spark plug gap [ 1 Answers ]

What is the correct spark plug gap for a 2001 grand am with a 2.5ltr. 4 cyl.

Spark plug won't screw in or stay screwed in [ 3 Answers ]

Hello All! I am a lawn mower newbie. I have MTD Yardmachine riding mower that I have been trying to change the spark plug on. I checked the manual to see what type of plug I needed. Bought the plug but couldn't get the plug to thread. Bought two new other plugs different...

Don't get spark from my spark plug wire [ 1 Answers ]

I get spark from my spark plug wire sometimes when I don't the jeep don't start Why I don't get spark sometimes?

View more questions Search