Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Briggs and stratton vanguard 16 hp twin engine with no spark
[ 10 Answers ]
I have a new Briggs and Stratton Vanguard 16hp twin installed in an ATV. Unfortunately on a shakedown run the exhaust pipe loosened and fell on the wireing harness from the ignition key and the engine immediately stopped as the pipe melted through the wire insulation, I assume shorting something...
What causes a 15.5 Briggs & Stratton engine to not start?
[ 4 Answers ]
My Sears mower has a 15.5 briggs and stratton engine that is 6 years old and is having trouble starting. Sometimes when I turn the key, the motor will turn 3/4 of rev and stop due to hard compression. I can hand turn the engine past this sport sometimes and the engine will begin to turn over. Even...
Briggs and Stratton Vanguard 16 HP Vertical engine
[ 1 Answers ]
Briggs and Stratton Vanguard 16 HP Vertical engine what is the push rod gap for intake and exust
Briggs and Stratton Vanguard 18 hp engine
[ 2 Answers ]
Can someone tell me how to drain the oil on a Vanguard Briggs and Stratton 18 hp engine? I have located the drain plug but there is some kind of plastic fitting over it with a flip-off nozzle on the end as if this is where the oil drains. It does not appear that the plastic fitting comes off. So,...
Briggs and Stratton Vanguard OHV Engine
[ 1 Answers ]
I have a new Briggs and Stratton 8000 watt generator powered by a Vanguard 15 hp overhead valve engine.Since it came from the factory it has a popping sound from the muffler as it runs. It seems as though there is a misfire. The spark plug has been changed and the spark is in spec. Service dealers... View more questions Search
|