Ask Experts Questions for FREE Help !
Ask
    rtdjl's Avatar
    rtdjl Posts: 4, Reputation: 1
    New Member
     
    #1

    Sep 21, 2010, 12:50 PM
    Sears model number 917.273770 - degree of difficulty on replacing gasket?
    I noticed oil dripping/burning on the muffler/exhaust directly below the cover/rocker gasket. Is this generally a cause for the oil leak? Mower runs fine but I get some blue smoke from the oil drip. What is involved/degree of difficulty in replacing this gasket? Is it simply removing the bolts and installing a new gasket? Can a do it yourselfer handle it
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Sep 21, 2010, 01:04 PM

    Which type of engine: B&S, Kohler, etc... model will help for the engine.
    rtdjl's Avatar
    rtdjl Posts: 4, Reputation: 1
    New Member
     
    #3

    Sep 22, 2010, 05:50 AM

    Briggs & Stratton 17.5 hp ohv
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #4

    Sep 22, 2010, 05:54 AM

    Just an Idea , check and make sure your oil level is good . Make sure there's no gas in the oil ,
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #5

    Sep 22, 2010, 07:56 AM

    " model will help for the engine"
    rtdjl's Avatar
    rtdjl Posts: 4, Reputation: 1
    New Member
     
    #6

    Sep 22, 2010, 01:35 PM
    Quote Originally Posted by DG View Post
    just an Idea , check and make sure your oil level is good . make sure theres no gas in the oil ,
    Oil may be a tad high and I do smell gas in the oil, not overpowering but it's there.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #7

    Sep 22, 2010, 02:18 PM

    Gas in the oil, totally drain the crank, flush and then refill with fresh gas. Until you find the cause of the gas leaking into the oil shut off the fuel shut off valve inder the tank. I suspect your needle valve in the carb may not be seating 100% and slowly drips raw fuel 24/7 which finds its way past the piston rings into your oil.
    rtdjl's Avatar
    rtdjl Posts: 4, Reputation: 1
    New Member
     
    #8

    Sep 22, 2010, 02:47 PM
    Engine model number - briggs and stratton model number 407577, type number 0283-E1

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sears tractor model 917.254850 [ 2 Answers ]

I have a sear riding mower model # 917.254850 14 hp Kohler engine model CV14s Type#PS1452 and every time I turn the key to the cranking position it blows the fuse and won't start. I have checked all the wires and none are burnt or bare. Can some one please help I know its an old tractor but it...

How can I replace the power drive belt in a Craftsman Model Number 917.251492 mower [ 2 Answers ]

My riding mower Power drive belt needs to be repaced and am asking the procedure for this. The belt is attaced to the transaxle and clutch

Sears Model 917.256524 Lawn tractor 15.5 HP [ 9 Answers ]

I have a 15.5 Hp Craftsman lawn tractor. It starts fine but when you push the blade lever up to engage the blades the mower dies. Also if you let out on the brake/clutch pedel the mower stops. Note: the blade safety switch is OK and so is the clutch safety switch as is the seat safety switch. Any...

Sears Craftman LT2000 Model - 917 273130 Belt Placement [ 3 Answers ]

I have Sears Craftman LT2000 Model - 917 273130 I need to replace the belt and need a diagram to show how to install the new belt I purchased.

2003 craftsman model 917.273770 lawn tractor [ 2 Answers ]

Trying to find grass bagger for 2003 craftsman LT2000 lawn tractor 22 HP with 42" deck or cross ref bagger #'s 24979/24989. What other baggers may fit .


View more questions Search