Ask Experts Questions for FREE Help !
Ask
    topshlef's Avatar
    topshlef Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2009, 10:30 AM
    Riding Mower not starting
    My rzt50 Cub cadet electric start clicks from the solenoid. I replaced the solenoid and it still clicks but does not start. I bypassed the solenoid but engine doesn't turn. Is the next logical step the Starter?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 18, 2009, 12:48 PM

    Hi,
    No, the next logical step is to check the valve clearance. But first take your hand and manually turn the engine clockwise past compression and try the starter again. My bet is that it is just held by compression and mis-adjusted valves.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

MTD riding mower starting probs [ 1 Answers ]

I bought this used MTD riding mower last year and is good mower but last year at the end of the cutting season it wouldn't start so I put it away till this year. I put new starter in it last year and fixed the steering drag links. I get nothing when trying to start it and am thinking it's the...

Riding mower starting problems [ 1 Answers ]

Craftsman riding mower started for the first time this season. Made one pass around the yard, shut mower off for less than a minute. Tried restarting and the only thing you hear when turning the key is an electrical type of grinding noise. Mower is 12 years old and have not had any problems at...

Push starting a riding mower [ 2 Answers ]

I have a Murray Select riding mower and wanted to know if it can be push started

Murray Riding Mower still not starting. [ 1 Answers ]

Have a 5 year old 17HP 42" Murray rider. Model # 42571x8A. Engine is model #42A707 Type 2653 E1 So far, I have replaced the battery, starter, solenoid, ignition switch, spark plugs, choke cable and rebuilt the carb and fuel pump. Also wire-brushed and cleaned all connections, etc. Shear...

View more questions Search