 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Riding mower engine troubleshooting
I have a Troy Bilt riding mower. It was running rough so I changed the spark plug which helped however after mowing for about 30 minutes the engine died. When I try to start it the engine turns over but immediately quits. If it is the carbeurator is there a fuel additive that can clean it?
|
||||
Check out some similar questions!
Troy bilt 1998 model 13AJ609G766 , automatic transmission, 18.5 Horsepower, 42" deck. Deck is not installed as yet. When releasing the foot brake pedal about half up, the engine stops. This is what I have done so far, checked the alignment of the brake and pto switches. Checked for...
I have a John Deere mower model 102. At a high RPM and a medium gear, the mower moves slowely. I changed a flat tire and made sure the axle keys are in the right place, I have changed the trans drive belt and that doesn't seem to be the problem. Any suggestions?
I have a craftsman riding mower lt4000 while it was running the engine just stopped and now when I try to start it I get one clunk that's it I was not using it when it just stopped it was just started in my garage I was getting ready to finish plowing with it I used it for like 2 hours earlier and...
I have a craftsman mower model number 917.258980 20.5 hp. My problem is that it will not start without the help of starting fluid. But right after the shot of fluid is exhausted it dies. The mower turns over good and yes I have gas in it. The fuel is getting to the carburetor, as I was able to...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
