 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Replacing shaft assembly mandrel
I have a 42 inch craftsman lawn tractor model no. 917.275640 and I ran over 2 large stones. It made a terrible noise and I stopped the blades. As I inspected them they were pretty chewed up, removed them though it appears that where the bolt screws into (shaft assembly mandrel) is bent. Looking into replacing this part seems to be difficult for this novice lawnmower guy. Can anyone help or advise me?
|
||||
Check out some similar questions!
Sorry if this shows up twice. I posted it awhile ago but don't see it online. Replacing the cast aluminum mandrel for one of the mower blades, wondering how to get the shaft and bearing out so I don't have to replace them, too. Tried whacking it with a rubber hammer, no luck. I can provide...
Please recommend a way to easily remove sprayer hose at the connection to the valve body underneath the sink without going to the trouble of removing the valve assembly completely. Thank you!
How do I replace the passenger headlight assembly on the 1991 Honda Civic? I can't get the old assembly out, to replace it. Could I get a diagram, or step by step instructions please?
I have had trouble with rust forming around the bottom of my white porcelain sink where the drain plate is from the old pop-up assembly. I am about to replace it. Would it be best to use a chrome-plated plastic one now or a brass one to keep rust from forming again?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
