Ask Experts Questions for FREE Help !
Ask
    Dancer's Avatar
    Dancer Posts: 14, Reputation: 1
    New Member
    		  
    #1

    Jun 1, 2006, 10:39 AM
    Rear engine snapper stopped moving
    Hi,
    I have a 14 hp snapper rear engine ride on mower, model 331415BVE, that stopped moving while I was cutting the lawn. The engine runs fine. With the engine in any forward or reverse speed the drive disc engages the clutch disc and disengages while in neutral. When I manually turn the clutch disc the drive wheel turns but will not turn if I hold the wheel -- which I guess is the reason the lawn mower will not move. Do you have any idea what the cause could be or how to troubleshoot the problem?

    Thanks,
    Harry
    thebriggsdude's Avatar
    thebriggsdude Posts: 1,096, Reputation: 53
    Ultra Member
    		  
    #2

    Jun 1, 2006, 01:39 PM
    The drive disk sounds like it needs replacing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snapper Tractor won't turn left... [ 6 Answers ]

I was wondering if anyone had a picture of the steering linkage of a front engine Snapper Tractor Model #LT14H331KV. Just started mowing today and the silly thing quit turning left. The steering wheel when turned left seems to hop in place instead of catching to turn the wheels left and I can't...

Snapper engine ID? [ 3 Answers ]

How do I identify which engine I have on my Snapper rear-engine rider? It's a model 30085 that I picked up for $20, and I need to replace a couple of things, but need to know what engine I have. Thanks for the help!

How to replace starter rope on snapper weedeater [ 1 Answers ]

I have a Snapper weedeater model #S31sngbc could someone tell me how to replace the starter rope I have most every thing apart but there is still a housing around the pully!!

Bronco stopped moving with loud bang [ 2 Answers ]

It sounded like I ran over a huge pothole but then the Bronco stopped moving and stalled. I turned the key off and opened the hood thinking maybe I blew something, but it all looked normal. I turned the key back on and it started right away. Moving the truck to drive however didn't cause the...

View more questions Search