Ask Experts Questions for FREE Help !
Ask
    tindel's Avatar
    tindel Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 6, 2009, 02:21 AM
    Push rod bent on 16HP Briggs

    Push rod is bent on 16 hp briggs and stratton - what are the possible causes
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Sep 6, 2009, 10:50 AM

    Hi,
    Moved your post to separate from a 3+ year old thread; only way it is liable to get noticed!
    Two things would be sheared key causing a timing error, or stripped camshaft gear causing piston to strike valve when open because of a different type of timing issue.
    Peace,
    Clarke
    randy1212's Avatar
    randy1212 Posts: 111, Reputation: 1
    Junior Member
     
    #3

    Sep 22, 2009, 05:41 AM
    I found on one the valve guide in the head moved and caused it to bind up and bent the push rod...
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Sep 22, 2009, 07:12 AM

    Hi,
    That happens, but the cause of it coming loose is generally fuel or heat related. Usually to second because of expansion of dissimilar metals at different rates.
    Unless you have a Vanguard, it means a new head under most circumstances.
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Briggs & Stratton 16hp ohv [ 1 Answers ]

I have a Toro ride on lawn tractor. It is blowing oil through the exhaust manifold. I have already changed the head gasket and rocker arm cover gasket. It idles fine at low rpm's but when I kick it up the motor starts to blow white smoke, oil comes out the exhaust, and the engine rpm's go up and...

Bent pushrod in 18.5 briggs and stratton ohv [ 2 Answers ]

What would cause a bent pushrod on a 18.5 hp briggs? Can I just replace rod?

Briggs & straton 16HP won't run [ 4 Answers ]

Hi, New here so I hope I get it right. I have a Yardmachine ride on mower with a Briggs & stration 16HP vanguard motor (single) 280777. When I try to start it, it run really rough and blow a lot of smoke and oil from the exhaust. I cleaned the carb and checked the soleniod and all seems...

Smoking 16hp briggs [ 2 Answers ]

My 16 hp briggs . When I mow on an angle or slope towards the carb. The engine starts to die and really heavy blue smoke pours ot exhaust.I checked in the air filterawhen this happens and there is fress oil there .Oil level is fine.On the flats it seems to work good.I've adjusted the valves since...

Briggs & stratton 16hp [ 1 Answers ]

Hi, I have a Cub Cadet which had a 16hp BS motor with points. It went bad so I found another 16hp BS that does not have points, it has the magnetron ignition. I am having trouble getting it to fire, is there something that I need to change to the wiring to make it fire. The magnetron engine came...


View more questions Search